Wood Stove and Fireplaces

It is that time of year again!  Colder temps have us all looking to our home heating systems which, a good number of times, means wood stoves and fireplaces.  Careful attention to safety can minimize fire hazards.

To use them safely:

• Be sure the fireplace or stove is installed properly. Wood stoves should have adequate clearance (36 inches) from combustible surfaces and proper floor support and protection.
• Wood stoves should be of good quality, solid construction and design, and should be UL listed.
• Have the chimney inspected annually and cleaned if necessary, especially if it has not been used for some time.
• Do not use flammable liquids to start or accelerate any fire.
• Keep a glass or metal screen in front of the fireplace opening, to prevent embers or sparks from escaping, unwanted material from going in, and to help prevent the possibility of burns.
• The stove should be burned hot twice a day for 15-30 minutes to reduce the amount of creosote buildup.
• Don't use excessive amounts of paper to build roaring fires in fireplaces. It is possible to ignite creosote in the chimney by overbuilding the fire.
• Never burn charcoal indoors. Burning charcoal can give off lethal amounts of carbon monoxide.
• Keep flammable materials away from your fireplace mantel. A spark from the fireplace could easily ignite theses materials.
• Before you go to sleep, be sure your fireplace fire is out. NEVER close your damper with hot ashes in the fireplace. A closed damper will help the fire to heat up again and will force toxic carbon monoxide into the house.
• If synthetic logs are used, follow the directions on the package. NEVER break a synthetic log apart to quicken the fire or use more than one log at a time. They often burn unevenly, releasing higher levels of carbon monoxide.
• Never discard hot ashes inside or near the home. Place them in a metal container outside and well away from the house.